The IS213 subwoofer is an ultra-compact, high-powered subwoofer intended to be used in ground stack configurations and to fit in compact spaces. The enclosure is loaded with two light-weight, 13” ND13-S Kevlar® Neodymium drivers utilizing Adamson’s Advanced Cone Architecture. It is mounted in an ultra-efficient front-loaded enclosure, designed to reproduce clean, musical low frequency information.
The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with two front and back Speakon™ NL4 connectors, or barrier strips available upon request. The IS213 ships with removable handles for easy handling, while allowing it to fit in tight spaces when the handles are removed, as well as rubber scuff guards on top and bottom that mate with additional IS213s for vertical stacking.
Frequency Range (+/-3 dB) | 33 Hz - 100 Hz |
Maximum Peak SPL** | 137 dB |
Components LF | 2x ND13-S 13” Kevlar® Neodymium Driver |
Nominal Impedance LF | 4 Ω (2x 8 Ω) |
Power Handling (AES / Peak) LF | 1600 / 6400 W |
Connection | 4x Speakon™ NL4 (2x Front 1+/1-, 2x Rear (2+/2-) or Barrier Strips |
Height Front (mm / in) | 349 / 13.75 |
Height Back (mm / in) | 349 / 13.75 |
Width (mm / in) | 813 / 32 |
Depth (mm / in) | 629 / 24.75 |
Weight (kg / lbs) | 36 / 80 |
Supported Processing | Lake |
**12 dB crest factor pink noise at 1m, free field, using specified processing and amplification
IS213 Spec Sheet | One page spec sheet for the IS213 | 501.37 KB |
IS213 User Manual | Comprehensive User Manual for the IS213 | 6.26 MB |
3D CAD Drawings | 3D CAD drawings of all IS-Series enclosures and rigging accessories | n/a |
Adamson Amplification Chart V5.4 | Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. | 463.25 KB |
Adamson Load Library V5.4 | Adamson's updated preset library - Requires Lake Controller 7.0.0 or higher | 32.73 MB |