Products - CS-SERIES

CS7

The CS7 is a two-way, full-range intelligent loudspeaker, intended for use in a wide variety of applications. Utilizing Adamson’s proprietary network platform, the CS7 employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplification. All features of the loudspeaker are controlled and monitored through Adamson’s proprietary CS software.

Acoustically, the CS7 contains 2x 7-inch Kevlar® Neodymium transducers and a 3” compression driver. The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 100°x 12.5° (H x V). The chamber’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the farfield. Adamson’s Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection. Please refer to the CS7 User Manual for further information.

Specifications

Frequency Range (+/-3 dB)	80 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V	100° x 12.5°
Maximum Peak SPL**	138 dB
Components LF	2x ND7-LM16 7” Kevlar® Neodymium Driver
Components HF	Adamson NH3 3” Diaphragm / 1.4” Exit Compression Driver
Rigging	Slidelock Rigging System
Connection	Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR
Height Front (mm / in)	203 / 8
Height Back (mm / in)	122 / 4.8
Width (mm / in)	527 / 20.75
Depth (mm / in)	411 / 16.2
Weight (kg / lbs)	17.5 / 38.6
Amplification	2 channel Class-D, 2400 W total output
Input Voltage	100 - 240 V
Current Draw	0.45 A rms idle, 1.5 A rms long-term, 9 A max peak
Supported Processing	Onboard / Proprietary

Accessories

	Ultra-Compact Support Frame (930-0025)	Support frame for CS7, S7, CS118 & S118 enclosures
	Ultra-Compact Line Array Micro Frame (930-0027)	Frame for up to 8x CS7 or S7 enclosures
	Ultra-Compact Pole Mount Adaptor Frame (930-0034)	Pole mount adaptor for CS7 or S7
	Extended Beam (930-0021)	Accommodates greater array articulation
	Moving Point Extended Beam (930-0033)	Extension beam with continuously adjustable pick point
	Line Array H-Clamp (932-0037)	Horizontal articulator clamp to be used with CS-Series/S-Series/IS-Series line array rigging frames (max load: 200 kg)
	Extended Lifting Plates (932-0043)	Lifting plates with fine resolution pick points for single point hangs (2 per set)
	Ultra-Compact Line Array Dolly (938-0022)	Transports up to 4x CS7 or S7 enclosures
	Ultra-Compact Line Array Cover 4up (907-0031)	Cover for 4x CS7 or S7 stacked on an Ultra-Compact Dolly (part no. 938-0022)
	Ultra-Compact Line Array Flight Case Single 3up (901-0004)	Flight Case for 3x CS7 or S7 stacked on an Ultra-Compact Line Array Dolly (part no. 938-0022)
	Ultra-Compact Line Array Flight Case Single 4up (901-0005)	Flight Case for 4x CS7 or S7 stacked on an Ultra-Compact Line Array Dolly (part no. 938-0022)
	Ultra-Compact Line Array Flight Case Double 4up (901-0006)	Upright case for 2 sets of 4x CS7 or S7 on 2 Ultra-Compact Line Array Dollies (part no. 938-0022, purchased separately)