The IS219 subwoofer is a high-powered subwoofer intended to be used in ground stack configurations and to fit in compact spaces. The enclosure is loaded with two light weight, long excursion, 19” SD19 Neodymium drivers, made with Kevlar® utilizing Adamson’s Advanced Cone Architecture, and a dual 5” voice coil for exceptional power handling. It is mounted in an ultra-efficient front-loaded enclosure, designed to reproduce clean, musical low frequency information.
The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with two front and back Speakon™ NL4 connectors, or barrier strips available upon request. The IS219 ships with removable handles for easy handles, while allowing it to fit in tight spaces when the handles are removed.
Kevlar® is a registered trademark of E.I. du Pont de Nemours and Company.
| Frequency Range (+/-3 dB) | 29 Hz - 100 Hz |
| Maximum Peak SPL** | 143 dB |
| Components LF | 2x SD19 19” Kevlar Neodymium Driver |
| Nominal Impedance LF | 4 Ω |
| Power Handling (AES / Peak) LF | 3200 / 12800 W |
| Rigging | No Rigging |
| Connection | 4x Speakon™ NL4 (2x Front 2+/2-, 2x Rear 1+/1-), or Barrier Strips / IP67 Cable Gland with Weatherized |
| Height Front (mm / in) | 508 / 20 |
| Width (mm / in) | 1168 / 46 |
| Depth (mm / in) | 875 / 34.45 |
| Weight (kg / lbs) | 90 / 199 |
| Supported Processing | Lake |
**12 dB crest factor pink noise at 1m, half space, using specified processing and amplification
| IS219 Spec Sheet | One page spec sheet for the IS219 | n/a |
| IS219 User Manual | Operation Manual for the IS219 | n/a |
| IS-Series Brochure | Product brochure for Adamson's IS-Series | n/a |
| Sketchup Library | Sketchup Models of all IS-Series enclosures and rigging accessories | n/a |
| 3D CAD Drawings | 3D CAD drawings of the IS-Series enclosures | n/a |
| Revit Model Library | Revit Models of the IS219 enclosure and accessories | n/a |
| Adamson Amplification Chart V5.3 | Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. | n/a |
| Adamson Load Library V5.4 | Adamson's updated preset library - Requires Lake Controller 7.0.0 or higher | n/a |